Acceptable Noise Level (ANL) Test

16 February 2022
10 - 30 mins
Reading

What is the acceptable noise level (ANL) test?

The acceptable noise level (ANL) test is a method of determining how much noise the patient is able to tolerate whilst listening to a target signal/speaker (Nabalek et al., 1991). It is used as a predictor for how well a patient will cope with amplification when receiving a hearing aid (Nabalek et al., 2006).

The ANL test is designed to be performed via loudspeaker as it is a free field test. However, it can be configured to perform monaurally via selection of headphones and routing the signal to the relevant ear-side. The Affinity Compact can perform the test binaurally via the R+L feature.

 

When to perform the ANL test?

The ANL test is typically performed before the patient is given any form of amplification as a rehabilitative action for their hearing loss.

 

ANL test procedure

  1. Launch the Affinity Suite from Noah or OtoAccess®.
  2. Click on the AUD tab on the upper right hand side of the screen. Ensure that your Audiometry has been performed ahead of advancing into the SIN test as this determines the start level for the test.
  3. Click on Menu, Tests and then select ANL
  4. Once in the ANL test screen, you will see that there are 4 different conditions which you can choose to measure.

    MCL High – This is the loudest comfortable level the patient can listen to without any competing noise
    MCL Low – This is the lowest comfortable level the patient can listen to without any competing noise
    MCL Real – This is the patient most comfortable level without any competing noise
    BNL – This is the actual ANL test where the MCL Real is presented and the competing noise is manipulated to find an ANL value

    It is not essential to perform MCL High and MCL Low for the ANL test, but these are also good indicators of the patients’ comfortable hearing range.

    Instructions for the patient will always be displayed at the bottom of the screen.
  5. MCL High
    Click on the MCL High Icon and click play. This will loop your speech material. 
    Most comfortable level high test screen. The written instructions to the patient state the following: I will play a story for you. I want you to signal me to increase or decrease the story to determine your most comfortable listening level. I will instruct you along the way. First, signal me to increase the loudness of the speech until it is too loud.
    Increase and decrease the stimulus intensity to match the patients loudest MCL.
    There will be no other change in the display to represent this, only the level in the MCL High icon box.

  6. MCL Low
    Click on the MCL Low Icon and click play. This will loop your speech material. 
    Most comfortable level low test screen. The written instructions to the patient state the following: Now you will hear the story at a softer level. Signal me to decrease the volume until the story is too soft.
    Increase and decrease the stimulus intensity to match the patients lowest MCL. 
    The display will change within the icon but also a predicted MCL Real will be generated as a midpoint between the MCL High and MCL Low.

  7. MCL Real
    Click on the MCL Real Icon and click play. This will loop your speech material. 
    If you have performed the MCL High and MCL low you should already have a predicted MCL value here. If not then increase/decrease the intensity to find a suitable level for the patients MCL. 
    Most comfortable level real test screen. The written instructions to the patient state the following: Now you will hear the story at a normal level. Signal me to increase or decrease the story to a comfortable listening level for you. Imagine I am the volume control of your television set and you want the volume to be adjusted so you can hear the television at a comfortable level all evening.
    Again the display will not change, other than inside the icon for your test condition.

  8. BNL 
    Click on the BNL Icon and click Play. This will loop the same speech material but also introduce the background masking noise. 
    BNL test screen. The written instructions to the patient state the following: You will listen to the same story with background noise of several people talking at the same time. First signal me to turn up the noise level until the noise is too loud. Then you will signal me to turn down the noise level until the story becomes very clear. Finally signal me to turn up the noise until we reach the MAXIMUM level that you would be willing to 'put up with' for a long time while following the story.
    Increase/decrease Channel 2 in order to find a level of competing noise which the patient would be comfortable to listen to alongside their target material. Whilst doing this you will notice the display will change to reflect the patients ANL value and the prediction percentage of how well they will perform with amplification.

 

What does the ANL value mean?

On performing the ANL test you will obtain an ANL value (in dB) and a percentage. The percentage gives a likelihood of success with amplification (Nabalek et al., 2006) and the ANL value is the outcome of the following calculation:

ANL = MCL -BNL

For response categories the following outcome criteria was determined as an effect of the Nabalek et al. (2006) investigation into ANL outcomes in relation to amplification:

  • ANL Score 7 dB or less: These individuals have a great prognosis for regular use and acceptance of hearing aids; may not need as much follow-up counseling and guidance as the average patient.
  • ANL Score 8-12 dB: These are your more common patients and have a good (8) or bad (12) prognosis for regular use and acceptance of hearing aids. These patients may need more follow-up counseling and are excellent candidates for noise reduction technologies.
  • ANL Score 13 dB or more: These patients are “at risk” for reduced utilization of hearing aids and may need additional post-fitting counseling, guidance, and require noise reduction technologies.

 

References

Nabelek, A.K., Tucker, F.M., & Letowski, T.R. (1991). Toleration of background noises: Relationship with patterns of hearing aid use by elderly persons. Journal of Speech and Hearing Research, 34, 679-685.

Nabelek, A., Freyaldenhoven, M., Tampas, J., & Burchfield, S. (2006). Acceptable noise level as a predictor of hearing aid use. Journal of the American Academy of Audiology, 17(9), 626-639.


Presenter

Interacoustics

Popular Academy Training

Interacoustics - hearing and balance diagnosis and rehabilitation
Copyright © Interacoustics A/S. All rights reserved.