Equinox Suite: How to set up your VRA

Transcript

This is how you set up your VRA in the Equinox Suite.

When setting up the VRA for the Equinox Suite, go to the menu and select Setup | General Setup.

From here, choose the VRA system you are using, which can be either the analog VRA201 (teddy box) or the digital VRA Pure system that you can access through the suite.

Next, go to setup again and find the AC440 setup.

Here you can create a new protocol and rename it.

This will be a copy of your AC440 protocol with the same settings.

Then go to the Pediatric setup and find the add-ons for the VRA setting.

You can activate the number of rewards, indicating how many screens or teddy boxes you have connected to your system.

For example, if you have two, set it to two.

The response window is the amount of time the patient has to respond to the stimuli by turning their head.

If they don't respond within this time, it will be marked as a no response in the ticksheet.

Once the setup is finished, click Apply and Save.

To start the VRA testing, go to Menu | Test | Pediatric.

Here you'll find the VRA controls on your right.

You'll have all your playlists created in the Playlist Creator window.

You can choose Reward Right or Reward Left to activate the corresponding screen with a reward for the patient.

You can also activate or deactivate the conditioning.

Now you know how to set up your VRA in the Equinox suite.