How to Change the Probe Tip
The busy professional quick switch ...switch now and clean later...
| Diagnostic probe | Clinical probe | |
|
Step 1: Unscrew the probe cap and remove the probe tip.
|
Step 1: Unscrew the probe cap and remove the probe tip.
|
|
|
Step 2: Make sure there is a gasket in the clean probe tip.
|
Step 2: Make sure there is a gasket in the clean probe tip.
|
|
|
Step 3: Replace with the clean replacement tip.
|
Step 3: Replace with the clean replacement tip.
|
|
|
Step 4: Assemble the probe again.
|
Step 4: Assemble the probe again.
|
Notice: Clean the probe tip regularly: To avoid earwax clogging the tubes of the probe tip and affecting measurements with your AT235/AA222, it is recommended to clean the probe tip regularly. Complimentary probe tip enclosed: As Interacoustics acknowledges that clinicians often have a busy workday, please find a complimentary probe tip enclosed with your AT235/AA222. Easily swap the probe tip: Easily swap the probe tip during the day, and clean it when the patients are out of the clinic. Please follow the steps 1 to 4 when you remove the probe tip and replace it with a new, clean one.
