Verifying Ear Level FM Systems

By Interacoustics

Introduction

Ear Level FM systems are intended to be used by patients who have normal or near-normal hearing and help increase the signal to noise ratio. They can be used, for example, in classroom settings for a child having learning difficulties or auditory processing disorders (APD). Typical use will include an ear-level FM receiver, coupled to a thin tube, in an open ear configuration. The steps below guide clinicians on how to perform straightforward realear verification of the ear level FM system, in order to verify the maximum output and the recommended volume setting for the FM receiver.

Verification steps

  1. Prepare the patient for normal real ear:
    • Position patient in front of the Affinity loudspeaker
    • Place the probe tube in the ear
    • Position the ear level FM receiver on the ear
  2. From Noah or from the Affinity Suite AUD screen, enter the audiogram. The audiogram will be within the range of normal/near normal.
  3. Click on the REM tab.
  4. Once in the REM screen, select the "Ear Level, FM only" protocol from the drop down list.
  5. Place the FM transmitter microphone inside the test chamber, facing the reference microphone

    NOTE: The test box reference microphone is the active microphone

  6. Close the lid of the test chamber.
  7. Measure the MPO:
    • Click on MPO to access the MPO test
    • Set the FM transmitter volume control to MAX
    • Click Start to measure the Real-Ear Saturation Response
    • If the MPO measurement is too high, adjust the FM output
  8. Measure the REAR and match target between 1kHz and 4kHz.
    • Select the appropriate FM-specific target:
      • FM Boom or
      • FM Chest
      • the choice should reflect what is used with the FM system being tested
    • Measure the REAR by clicking the Start button
    • Adjust volume control on the FM receiver to match the targets between 1kHz and 4kHz
  9. Re-measure the RESR/MPO at user setting

References

American Academy of Audiology (April 2011). Clinical Practice Guidelines: Remote Microphone Hearing Assistance Technologies for Children and Youth Birth to 21 Years (includes supplement A).

Angelo, Kamilla & Fuglholt, Merethe L. (2013). Amigo Star. A New Ear-Level FM-Only Receiver. Pediatric Knowlegdge Brief.

Eiten, Leisha R. FM for Children, Chapter 7. Assessing Open Ear Edulink Fittings.

Presenter

Interacoustics

Available Training

How to perform frequency lowering verification

In this Affinity 2.0 quick guide, you'll learn how to determine if you should apply frequency lowering and how to verify the frequency lowering feature.

Interacoustics2026-10-28

BKB-SIN speech-in-noise test

In this quick guide, you will learn how to use the BKB-SIN speech-in-noise test provided with the Interacoustics Affinity 2.0 audiometer. Read more.

Interacoustics2026-10-28

Binaural Real Ear Measurements

Learn how to perform binaural real ear measurements (REM) with the Affinity 2.0.

Interacoustics2026-10-28

How to perform FM transparency verification

In this Affinity 2.0 quick guide, you'll learn how to perform FM transparency verification. Read more.

Interacoustics2026-10-28

How to Verify Directional Hearing Aids

Learn how to verify directional hearing aids with the Affinity 2.0 system, using real ear measurements (REM).

Interacoustics2026-10-28

AC440 Protocol Setup

There are many different demands and wishes regarding how an audiometer should both function and appear depending on the specific situation and national standards. One of the greatest advantages of the AC440 module is the flexibility, enabling you to tailor the system according to your specific preferences in the so-called “test protocols”. This article describes basic functionality on how to work with the AC440 Protocols.

Interacoustics2026-10-28

Print Reports

Learn how to create customized print templates for the Affinity 2.0, which can be linked to individual protocols for quick printing.

Interacoustics2026-10-28

Hearing Instrument Testing

Learn how to perform hearing instrument testing with the Affinity 2.0 device.

Interacoustics2026-10-28

Real-Ear-to-Coupler Difference

Learn how to measure the real-ear-to-coupler difference (RECD) with the Affinity 2.0 device.

Interacoustics2026-10-28

QuickSIN Test

Learn how to perform the quick speech in noise (QuickSIN) test with the Affinity 2.0 device.

Interacoustics2026-10-28

Basic Audiometry

Learn how to do basic audiometry with the Affinity 2.0 device.

Interacoustics2026-10-28

TEN Test in AC440

Learn how to perform the threshold equalizing noise (TEN) test with the Affinity 2.0 device.

Interacoustics2026-10-28

How to Use the SKS10 Skull Simulator

Click here to learn what a skull simulator is and how you can use skull simulators to measure the performance of bone anchored hearing devices.

Interacoustics2026-10-28

Adult Hearing Aid Verification

Learn how to verifiy hearing aids in adults with the Affinity 2.0 device, using real ear measurements (REM).

Interacoustics2026-10-28

Visible Speech Mapping

Learn how to perform visible speech mapping with the Affinity 2.0 device.

Interacoustics2026-10-28

Speech in Quiet (SIQ) Test

Learn how to perform the speech in quiet (SIQ) test with the Affinity 2.0 device.

Interacoustics2026-10-28

Looking for clinical training?

Are you looking for more advanced and clinical training?